Terp Liquefy is a line of strain specific terpene blends made to thin thick concentrates like wax, shatter, budder and distillate into smooth, cart ready oil while putting real strain flavor back into the extract. It launched here in 2018 and every blend is food grade with zero nicotine, zero THC and zero CBD in the bottle. This guide covers how it works, how much to use for each type of concentrate, the mixing process step by step, and how to handle terpenes safely.
How Terp Liquefy Works
Terpenes are natural plant oils, and they happen to be excellent solvents for sticky extracts. When you mix Terp Liquefy into wax, shatter or distillate, the terpenes dissolve into the concentrate and lower its viscosity, turning a thick dab into a flowing oil that wicks properly in a cartridge. Because each blend is built from the terpene profile of a specific strain, you are not just thinning the extract, you are restoring the aroma and flavor that gets stripped out during processing.
Three things happen when you add it: the extract gets thinner (solubility), the final oil holds a stable cart friendly consistency instead of separating or recrystallizing (consistency), and the strain profile comes through in every hit (flavor).
How Much Terp Liquefy to Use
Terp Liquefy is measured as a percentage of your concentrate by weight, in line with our terpene ratio guide. Use a scale that reads to 0.01g. These are starting points, not ceilings: begin at the low end, mix, check the consistency, and add more in small increments until the oil flows the way you want.
| Concentrate type | Starting ratio by weight | Notes |
|---|---|---|
| Distillate | 4 to 7% | Already fluid when warm, needs the least help |
| Shatter and crumble | 9 to 11% | Warm first so the terpenes can work in evenly |
| Wax and budder | 9 to 11% | Higher lipid content, thins slower, be patient before adding more |
Why these ratios are higher than generic terpene advice
You will see 1 to 5% recommended elsewhere online. That guidance is for raw isolated terpenes, which are extremely concentrated and turn harsh fast if you overdo them. Terp Liquefy works differently. Each blend takes naturally extracted plant terpenes and enhances them with additional odorless, flavorless terpenes that handle the work of naturally breaking down the extract. That structure buffers the flavor load, so the mix stays smooth at the working ratios that actually get a concentrate to cart viscosity. That is why our starting range sits at 4 to 11% by weight instead. The rule is the same either way: start low and work up.
Mixing Step by Step
These steps assume you are starting with a decarboxylated extract. Distillate comes already decarbed, so it is ready to mix as is. Wax, shatter, budder and rosin need to be decarbed first. If you have not done that yet, our decarb guide walks through it.
- Weigh your concentrate in a heat safe glass mixing vial.
- Warm it gently until it loosens. A hot water bath around the vial works well. Keep it low and slow, never direct flame, high heat cooks off the compounds you are trying to keep.
- Add Terp Liquefy at the starting ratio for your concentrate type from the table above.
- Stir for one to two minutes until the mixture is completely uniform with no streaks or clumps.
- Check the flow. If it is still too thick once it cools slightly, add more in small increments and stir again.
- Draw the finished oil into a blunt tip syringe and fill your cartridges while it is still warm.
On temperature: the lab answer is 100 to 110 C for the fastest, most complete integration. At home you do not need to hit that number. Gentle warming does the job, and the mix will even come together at room temperature if you give it a few days to fully integrate. Do not stress the exact temp, just avoid direct flame and scorching heat.
Safety and Handling
- Never put undiluted terpenes on your skin and never consume them raw. Straight terpenes are strong enough to cause irritation. Always dilute into your extract first.
- Wipe up spills right away, undiluted terpenes can damage plastics and finished surfaces.
- Store bottles upright, tightly capped, in a cool dark place. Heat and sunlight degrade terpenes over time.
- Keep out of reach of children and pets.
Terp Liquefy vs Other Liquidizers
Most liquidizers on the market thin extracts with carriers like propylene glycol (PG), polyethylene glycol (PEG), mineral oil, or other synthetic thinners and thickeners. Terp Liquefy contains none of that. Every blend is made from 100% pure organic terpenes: naturally extracted plant terpenes enhanced with additional odorless, flavorless terpenes that do the job of naturally breaking down extracts. The viscosity change comes from terpenes doing what terpenes do, not from a synthetic carrier.
Frequently Asked Questions
How much Terp Liquefy should I add to distillate?
Start at 4% by weight for distillate. Warm the distillate first, mix thoroughly, and add up to 11% if you need a thinner flow. Distillate needs the least thinning of any concentrate type.
Do I need to heat my concentrate before mixing?
It helps a lot but it is not strictly required. A warm concentrate accepts the terpenes evenly and mixes in minutes, while a room temperature mix can take a few days to fully integrate. Use low indirect heat like a hot water bath, never direct flame or scorching temperatures.
What temperature should I mix at?
The lab answer is 100 to 110 C for the fastest, most complete integration. At home, gentle warming is enough, and the mix will fully integrate even at room temperature over a few days. Avoid direct flame and do not stress over hitting an exact number.
Will Terp Liquefy dilute the strength of my extract?
At a 4 to 11% ratio you are adding a small amount of terpenes relative to the extract, so the effect on overall strength is minor. Many users find the restored terpene profile improves the overall experience of the finished oil.
Can I use Terp Liquefy with rosin or live resin?
Yes. Treat rosin like wax and start around 9% by weight. Live resin already carries its own terpenes, so start lower and add to taste, you may need very little.
Is it safe to handle terpenes?
Handle them like any concentrated botanical oil. Never apply undiluted terpenes to skin and never ingest them raw, they can cause irritation at full strength. Once diluted into your extract at proper ratios they are doing exactly what they were formulated for.
How should I store terpenes?
Cool, dark and tightly capped. Terpenes degrade with heat, light and air exposure. Stored properly, an unopened bottle keeps its profile for a long time.
Starting from raw material instead of a finished extract? The wax to vape walkthrough covers the whole process end to end.
Ready to mix? Shop Terp Liquefy strain blends here, available in 1ml and 10ml.